20
Setting Up the Kaleido-IP
System Setup
Opening XEdit in Online Mode
To open XEdit in online mode
1 From a workstation on the same subnet as the multiviewer, open a Web browser
window and enter the
management
IP address of your Kaleido-IP multiviewer in the
address bar.
The Kaleido-X home page appears.
2 Click the
XEdit
button.
3 When prompted to specify a database, choose one from the
Path
list, or click
Browse
to
specify another location, and then click
OK
to continue.
The main application window appears.
4 On the
Configure
menu, click
Connect
.
5 In
Connect to Multiviewer
, Enter the
management
IP address for the Kaleido-IP you
wish to configure, and then click
OK
.
The selected system’s hierarchical list appears in the main pane, showing the
multiviewer type, system name and IP address, and the status bar shows the
connection status.
Configuring Transport Streams
The default configuration for a Kaleido-IP system includes eight predefined any-source
multicast (ASM) streams, under NETWORK ADAPTER 2. Before you can use these streams,
you must adjust their settings to match the actual transport streams you wish to monitor.
Depending on your monitoring purposes and Kaleido-IP model, you may also need to add
transport streams, including other types of transport streams (see
Adding Stream Sources
,
on page 22).
Modifying the Set of Predefined Streams
To modify settings for a multicast transport stream
1 In the main window, click the
System
tab, and then click
Description/Calibrations
on
the second level tab bar.
2 Expand the System hierarchical list, and then navigate to the multicast transport
stream you wish to configure, under
NETWORK ADAPTER 2
.
