GRASS VALLEY K2 Lx0 Скачать руководство пользователя | Manualshive

Страница: 24 / 56

background image

24

K2 Lx0 RAID Instruction Manual

July 31, 2008

Chapter 2 K2 Lx0 RAID Installation Information

3. Loosen the rail adjustment screws so that the inner rail slides freely.

4. Align the mounting holes on the outer rail guide bracket with the front channel

mount holes. The protrusions on the guide bracket guide the rail to appropriate
positions on the rack.

5. Place the two M3 mounting screws through the rack bracket, through the front

channel mount holes, and into the mounting holes on the guide bracket. Tighten the
screws to secure the outer rail to the front channel mount.

6. Move to the rear of the rack and pull the inner rail toward you to align the inner rail

guide bracket mounting holes with the back channel mount holes. The protrusions
on the guide bracket guide the rail to appropriate positions on the rack.

7. Place the two mounting screws through the rack bracket, through the back channel

mount holes, and into the mounting holes on the guide bracket. Tighten the screws
to secure the outer rail to the back channel mount.

8. Firmly tighten the rail adjustment screws.

9. Repeat this procedure for the other side rail.

Inserting the K2 Lx0 RAID chassis in the rack

1. Rest the chassis on the support angles shown. Slide the chassis back and into place

2. Secure the chassis to the rack with the 10-32 mounting screws. On racks with

threaded holes the mounting screws engage the rack’s threaded holes. On racks
without threaded holes the mounting screws engage the H type guide bracket’s
threaded holes.

Rack

Rack
Bracket

Bracket

Guide
Bracket
T type

Guide
Bracket
H type

«
...
22
23
24
25
26
...
»

Содержание K2 Lx0

























































Отзывы:

Нет отзывов

Похожие инструкции для K2 Lx0

Бренд: Falcon Страницы: 19

Бренд: G-Technology Страницы: 51

TotalStorage DS4800

Бренд: IBM Страницы: 250

TotalStorage DS4800

Бренд: IBM Страницы: 234

Бренд: IBM Страницы: 136

System Storage DS5020

Бренд: IBM Страницы: 31

Netfinity EXP300

Бренд: IBM Страницы: 93

Бренд: IBM Страницы: 270

Ultrastar 36LZX

Бренд: IBM Страницы: 2

DCAS-32160 - Ultrastar 2.1 GB Hard Drive

Бренд: IBM Страницы: 232

System Storage TS3310

Бренд: IBM Страницы: 531

Duramax Yardmate

Бренд: USP Страницы: 25

Бренд: AIC Страницы: 88

Recessed Mounted Pan Door Medicine Cabinets 935/936

Бренд: NuTone Страницы: 1

My Book World Edition WDH1NC10000

Бренд: Western Digital Страницы: 2

Бренд: LaCie Страницы: 24

Maxtor OneTouch 4

Бренд: Maxtor Страницы: 84

P6110f - Pavilion - 6 GB RAM

Бренд: HP Страницы: 33

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды