GRASS VALLEY K2 Dyno PA, Руководство по настройке, Страница: 34 / 60

About standalone K2 Summit system and K2 Dyno PA DLC
configuration
To use the Browse feature in a system with a standalone K2 Summit Production Client,
the Quantum StorNext Distributed LAN Client (DLC) on the K2 Summit (the DLC
server) and K2 Dyno PA (the DLC client) systems must be con
fi gured. This requires
modifying the SNFS FsNameServers fi le on each machine. On a standalone K2 Summit
Production Client, run the DLC Con fi guration tool to add, edit, or remove the IP
addresses from the FsNameServers fi le.
To set up DLC on the K2 Summit and Dyno PA systems, you need:
On the standalone K2 Summit system:
• The requirements described in K2 Dyno PA Prerequisites. For information on
con
fi guring the K2 7.2.x software, consult the K2 Summit Production Client
documentation.
• If upgrading to K2 7.2x software from an earlier version, the K2 Summit system
needs a unique
fi le system name and storage disk labels, as described in Creating
a unique fi le system name and storage disk labels. File system names are case
sensitive.
• The DLC Tool needs to be installed. This tool ensures that the FsNameServers fi le
on all the standalone K2 Summit Production Clients contains the IP address of the
Control ports of the name servers. There can be a maximum of three name servers.
• Network adapters con fi gured for the Dyno PA Browse feature. For more
information, see Ordering the Network Adapters for K2 Dyno PA.
On the K2 Dyno PA machine:
• The requirements described in K2 Dyno PA Prerequisites.
• The identical FsNameServers fi le that was required for the K2 Summit system
must also be located in the C:\SNFS\Con fi g folder of every Dyno PA machine that
is sharing the platform service.
• In the Dyno PA application, the administrator must use the SNFS con fi guration
button to map drives for each SNFS-con fi gured K2 Summit system that will be
used with that Dyno PA.
Related Links
Con fi guring the standalone K2 Summit system and K2 Dyno PA on page 33
About the FsNameServers fi le on page 35
Ordering the network adapters for K2 Dyno PA on page 36
Creating a unique fi le system name and storage disk labels
Con fi guring the DLC server manually on page 40
Con fi guring SNFS for the DLC or iSCSI client on the K2 Dyno PA on page 47
34 K2 Dyno Production Assistant Con fi guration Manual version 1.5 15October 2010
Con fi guring the standalone K2 Summit system and K2 Dyno PA