GRASS VALLEY K2 Dyno PA, Руководство по настройке, Страница: 30 / 60

PA machines on the Media (iSCSI) network. For more information on the K2
Con
fi guration application, see the K2 Summit documentation.
1. On the Control Point PC, open the K2 Con fi guration application.
2. At the login dialog box, log in with the correct administrator account. By default
this is as follows: User name —
administrator
Password —
adminK2
The K2 System Con fi guration application appears, displaying a hierarchy of
machines with the K2 Summit SAN at the top, followed by the GigE switch,
and then each of the K2 Dyno PA machine clients.
3. If you need to add another K2 Dyno PA client to the hierarchy:
a) Select the server and click
Add Device
.
b) In the Add Device window, click iSCSI Client and click
OK
.
A new iSCSI client device gets added to the hierarchy.
4. Select the iSCSI client to be con fi gured in the hierarchy view and click
Configure
.
5. At the Client Con fi guration - Page 1 screen, enter the machine name of the K2
Dyno PA client you are con fi guring (such as Client1) and click
Next
.
6. At the Network Con fi guration screen, click
Modify
to change the IP address and
subnet of any network adapters for this machine, and then click
Next
.
7. At the File System Client Con fi guration screen, enter the drive letter you want to
con fi gure as the iSCSI drive on the K2 Dyno PA machine; click
Next
.
8. At the iSCSI Initiator Con fi guration screen, enter client bandwidth:
a) Click
Modify
.
b) Enter the total bandwidth requirement for this K2 Dyno PA client machine.
(For instructions see the next section, Calculating K2 Dyno PA Machine
Bandwidth).
c) Click
Assign TOE
.
CAUTION: To avoid bandwidth usage issues, assign the K2 Dyno PA
machine to a TOE that does not have a K2 Summit client.
9. Click
Next
.
10. At the Completing the Con fi guration Wizard screen, click
Finish
.
The wizard closes and the K2 Dyno PA machine reboots.
11. Repeat this procedure for each K2 Dyno PA machine on the K2 network.
12. Proceed to Con fi guring SNFS for the DLC or iSCSI client on the K2 Dyno PA.
Related Links
Con fi guring the K2 Summit SAN and K2 Dyno PA on page 21
Calculating K2 Dyno PA machine bandwidth on page 31
30 K2 Dyno Production Assistant Con fi guration Manual version 1.5 15October 2010
Con fi guring the K2 Summit SAN and K2 Dyno PA