GRASS VALLEY IQMIX25 Series, Руководство пользователя

Страница: 74 / 98

74
RollCall Control Panel
Logging - System
HARDWARE_BUILD= Reports the hardware build number.
FEATUREBOARD_VERSION= Reports the feature board version number.
FEATUREBOARD_MOD= Reports the feature board modification number.
FEATUREBOARD_BUILD= Reports the feature board build number.
FIRMWARE_VERSION= Reports the firmware version number.
UPTIME= Reports the time since the module was last restarted, in
the format
ddd:hh:mm:ss .
RC_UPTIME= Reports the time since the RollCall process was last
restarted, in the format
ddd:hh:mm:ss .
ROL_STATES= Reports the RollCall status. Valid values are:
• OK
• FAIL: n where n is the RollTrack index or indices which
are failing
• Disabled
REAR_ID= Reports the code number of the rear fitted.
REAR_STATUS= Reports the status of the rear where it can be determined.
SLOT_WIDTH= Reports the slot width. IQMIX modules are available in
single and triple width.
SLOT_START= Reports the slot in the rack where IQMIX is located.
POWER_USAGE= Reports the power usage in Watts (A-type rack)/PR Units
(B-type rack).
TEMP_ N _CELSIUS= Reports the temperature status of the FPGA.
TEMP_ N _NAME= Temperature measurement name.
REFERENCE_ N _SOURCE= Reports time reference source.
REFERENCE_ N _STATE= Valid values are:
• OK: Locked
• OK: Input
• WARN: Freerun
• WARN: CrossLock
TIMESYNC_ N _MODE= Valid values are:
• Free running : Card is using its own clock with no
reference to any other source.
• PTP Multicast : Card is synchronizing to a PTP
grandmaster clock using multicast network messages.
• PTP Unicast : As PTP Multicast but using the delay
request. Reply messages are unicast to minimize
network traffic.
• NTP : Module clock is synchronized to an NTP clock.
Generally less precise than PTP.
TIMESYNC_ N _NETWORK= Network port currently being used for synchronization for
IQMIX modules, dependent on the choice of interfaces
made on the Time Configuration page. If PTP and multiple
interfaces are enabled, the PTP synchronization will switch
ports if it doesn't see regular sync messages on the port.
Log Field Description