GRASS VALLEY INDIGO AV MIXER, Быстрый старт

Страница: 16 / 276

14 INDIGO AV Mixer Quick Start Guide
Section 4 — Initial Settings
4.3 Audio Settings
To adjust the audio settings:
1. Select the SETUP main menu.
2. In the
AUDIO
submenu, press the
Operation Mode
button to select one of
the following modes:
•
8 Stereo
: You can use the audio signals of eight stereo sources,
deriving from RCA, TRS 1/4’’, XLR, AES/EBU signals or even de-
embedded audio from video streams.
•
7 Stereo, 2 Mic
: You can use seven stereo audio signals and two
microphones that are connected to LINE/MIC IN inputs.
•
6 Stereo, 4 Mic
: You can use six stereo audio signals and up to four
microphones that are connected to LINE/MIC IN inputs.
3. If desired, in the
CONTROL PANEL
submenu Control Panel Submenu on
page 135, press
Fader Assign
and set the audio signal routing (i.e. which
audio source is routed to which fader in the Audio Control Subpanel.
By default, the faders are assigned according to the number of the
audio signal input channel, for example, the signal from audio input 3
is routed to fader
3
.
4.4 Example Setup
The following figure shows a possible setup:
Figure 7. Connections for a big event setup
INDIGO_Update_QSG.book Page 14 Tuesday, August 21, 2007 3:31 PM