GRASS VALLEY INDIGO AV MIXER, Быстрый старт

Страница: 15 / 276

INDIGO AV Mixer Quick Start Guide 13
en
gl
ish
espa
ño
l
de
ut
sch
français
itali
ano
po
lski
po
rtug
uê
s
русский
中文
Section
4
Initial Settings
If you switch on your INDIGO AV Mixer for the first time or use a new
setup (i.e. you connected different or additional devices) you have to
adjust the video and audio settings after first power-on.
4.1 Power-On
Use the power switch on the rear side to switch on your INDIGO AV
Mixer .
Figure 6. The power switch
4.2 Video Settings
Configure the video settings as needed, according to the connected
devices:
1. Select the
SETUP
main menu to make your settings.
2. In the
VIDEO
submenu, press the
Input
button to list all video inputs and
set the signal Type for each (used) video input.
3. Press the
Output
button and select the desired Graphic Standard
(resolution) and Type (PAL or NTSC).
4. If desired, in the
CONTROL PANEL
submenu Control Panel Submenu on
page 135, press
Button Assign
and set the video signal routing, i.e. which
video Sources are routed to which Buttons on the Background
crossbar.
By default, the buttons are assigned corresponding to the number of
the video signal input channel, SD stills are assigned to buttons.
INDIGO_Update_QSG.book Page 13 Tuesday, August 21, 2007 3:31 PM