GRASS VALLEY Ignite JSC-2300 SHOT, Инструкция по эксплуатации

Страница: 31 / 66

Ignite JSC-2300 SHOT Director Robotics/Camera Controller Instruction Manual 31
Dialog Boxes
Pan/Tilt IP Table Dialog Box
The
PAN/TILT IP TABLE
dialog box ( Figure 19 ) is used to set/change the
default IP addresses assigned to camera 1 through camera 16. To access it,
press the
Setup
button, select
PAN/TILT SETTINGS
, then select
IP ADDRESS TABLE
.
It enables a user to:
Figure 19. Pan/Tilt IP Table Dialog Box
SUBNET:
Set the Pan/Tilt head subnet address
CA:
Set the SHOT Director controller IP address
DFLT:
Fill
IP
with the default Pan/Tilt IP address stored in the Lookup
Table
for the currently selected camera (refer to
Pan/Tilt IP Table
Dialog Box on page 31 )
SET:
Send and save
IP
,
SUBNET
, and
CA
addresses to the Pan/Tilt head
OK:
Close the
PAN/TILT IP ADDRESS
dialog box
Table:
View and select CAM1 through CAM16 default IP
addresses. When selected, the camera ID and current
default address fill in the edit address boxes below the
table.
Edit address
boxes:
Change the default address for the selected camera
DFLT:
Reset the Lookup Table to the defaults listed in Table 1
SAVE:
Save new table settings
OK:
Close the
PAN/TILT IP TABLE
dialog box
8
4
9
3_
s
c1
8
_r0