manualshive.com logo in svg

GRASS VALLEY Focus 70 Live, Руководство пользователя

Поделиться
Скачать
GRASS VALLEY Focus 70 Live Скачать руководство пользователя страница 12

12

Focus 70 Live Highly Affordable HD System Camera User’s Guide (v1.1)

Fiber-optic transmission units

Laser safety statement (for Europe)

Fiber-optic transmission units are classified as a “Class 1 Laser Product” according to 
EN 60825-1, Safety of Laser products. CLASS 1 laser products are considered safe and do not 
result in biological hazard if used according to the instructions.

Laser safety statement (for US)

Fiber-optic transmission units are ified as a “Class 1 Laser Product” according to 
21CFR 1040.10 of the US Food and Drug Administration (FDA) Center for Devices and 
Radiological Health.

WARNING 

Use of controls, adjustments or performance of procedures other than those specified herein 
may result in hazardous radiation exposure.

WARNING 

To ensure proper use of this product, please read this instruction manual carefully and retain 
for future reference. Should the unit ever require maintenance, contact an authorized service 
location.

Fiber-optic cable precautions

Fiber-optic cables and connectors are easily damaged; take the following precautions into 
account:

•

Do not bend the cable beyond the minimum permissible bend range specified for the 
cable.

•

Avoid kinks in the cable. 

•

Avoid subjecting the cable to a high tension force (even momentarily).

•

Do not twist the cable when connecting it to equipment.

•

Insert connectors straight and fully into their corresponding sockets.

•

In fiber-optic cable systems always put the dust caps on cable and panel connectors 
immediately after disconnecting a cable. Keep the dust caps clean.

Содержание Focus 70 Live

















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды