GRASS VALLEY CR6400 Series, Руководство пользователя

Страница: 42 / 68

32
Operation
Stand-Alone Network
This sample shows destination 5 locked on levels 2 and 3, but not level 1:
When you press ‘Destination Lock’, immediately goes high-tally red and the selection button for
the destination goes high tally red. Changes to that destination are disabled on all selected
levels. If you subsequently press a destination button that is locked, the button goes high tally
(red), and the Destination Lock button goes high tally, as this sample shows.
Changes to other destinations remain enabled and other destinations remain unchanged,
whether locked or unlocked. Note that you can route the source that feeds a locked destination
to any number of other destinations.
When you select another (unlocked) destination, a locked destination goes low-tally red. This
illustration shows destination 1 selected and destination 5 locked. Because the selected destina-
tion is not locked, the ‘Destination Lock’ button is not red, but low-tally amber:
To unlock a destination,
1 Press level buttons on a panel to select the intended levels.
2 Press ‘Destination Mode’.
3 Press the selection button for the destination you want to unlock.
4 Press ‘Destination Lock’.
This will clear the lock on the locked levels you have selected and set the lock on unlocked
levels you have selected.
49 50 51 52 53 54 55
33 34 35 36 37 38 39
17 18 19 20 21 22 23
1 2 3 4 5 6 7
PNL
LOCK
DST
LOCK
LVL
3
LVL
2
LVL
1
DST
MODE
SRC
MODE
Locked
Destination
Destination Lock
49 50 51 52 53 54 55
33 34 35 36 37 38 39
17 18 19 20 21 22 23
1 2 3 4 5 6 7
PNL
LOCK
DST
LOCK
LVL
3
LVL
2
LVL
1
DST
MODE
SRC
MODE
Locked
Destination
Selected
Destination