GRASS VALLEY 6026 Series Скачать руководство пользователя страница 5

Страница: 5 / 6

6026 Series Quick Setup Guide

Ethernet Comms Setup

Note: IP address

must match database configuration.

Change IP details from default values before connecting to a real network:

Using a PC configured to be on the same subnet as the panel default address, connect to the
panel.

Open a web browser, type the default IP address

192.168.1.1

and press

Return

In the Control Panel Setup screen that displays in the browser, type the new control panel IP address,
subnet mask, and gateway.

Type the Nucleus controller IP addresses and port numbers. Controller port numbers must be greater
than 1024 (excluding 3000).

Click

Submit Settings

Click

Reset Control Panel

Key Brightness

Hex switch 2 sets the brightness of the keys.
0 = minimum brightness, through to
7 = maximum brightness
(Switch settings 8 - F are not used)

Содержание 6026 Series

Страница 1: ...6026 Series 2U Control Panels Quick Setup Guide ...

Страница 2: ... Panel Equivalent 6026778 6277 20 40 Multi bus Panel Equivalent 6026777 6277 60 80 Multi bus Panel Equivalent LCD Control Panel 6026783 The LCD panel has a 64x32 pixel LCD on each key and a single rotary encoder The LCD panel is compatible with Aurora control systems ...

Страница 4: ...rop address must match database configuration Set DIP switches 1 and 2 down to terminate long cable runs or the end of a multi drop chain Hex Switch 1 sets the multi drop address Switch 1 2 3 4 5 6 7 8 9 A B C D E F 0 Address 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 ...