38
Fig. 10.
The 90CA main window for microphone calibration
The main screen offers the following:
1. A conventional software menu bar
2. Tabs where you select the different parts of the calibration process: TEST, where
you work during the calibration; RESULTS, where you view the data from your
calibration; MICROPHONE DEFINITION; SYSTEM SETUP.
3.
Buttons to start and stop calibration, to save, and to print.
4.
Buttons for use during the calibration: Start Calibration, Level Calibration,
Frequency Calibration, and Edit Test Conditions.
5. The “Test Conditions” you enter are displayed here (part 1 of Microphone
Registration).
6. The “Test ID” you enter is displayed here (part 2 of Microphone Registration) .
3
4
6
8
5
7
1
2
Introducing the Calibration Software SW0002
The 90CA is delivered with the software preinstalled. It can be launched from the
desktop as with any Windows application.
IMPORTANT
. If you decide to install a new version of LabView,
DO NOT
uninstall the
version that comes with the system, because if you do, the calibration software will not
work properly, or at all.
