GRAPHTEC WR3320A, Руководство пользователя

Страница: 2 / 50

INTRODUCTION
The WR3320A was developed by making fundamental improvements to an
earlier model, making this recoder significantly easier to use, and greatly
improving functions, performace, and reliability. The WR3320A can be used
for a winde variety of applicaitons in the various recording fields.
After removing the packaging, take time to carefully read this instructoin
manual. If power is applied to the recoder improperly, or if parts of the
recoder other then those designated in this manual are desmantled, condi-
tions dangeros, or irreparable tp the recoder may occur.
CAUTIONS BEFORE USE
●
After Unpacking
After the recorder has been unpacked, preform a visual inspection,
referring to the table in Section 5-3 listing the quantities of acces-
sories. If the recorder is damaged in any wey, or shortages in acces-
sories are discovered, contact your dealer.
●
Recorder Installation Location
The WR3320A should be installed on a horezontal base, indoors, in a
normal intreior environment.
Avoid the following environmental conditions when selecting an
installation location.
●
Locations with excessive dust, drit, wiht saline atmospheres,
or locations subject to corrosive gases
●
Locations where temperature or humidity exceed the specifica-
tions in this manual
●
Locations subject to direct sunlight
●
Locations subject to excessive vibration or shock
●
Locations subject to lightning or other surge voltages or EMI
●
Power Supply
Use a power supply within ±10% of the nominal voltage wiht a
minimum line capacity of 10 A (for 100-V operation) and one that
allows easy protective grounding.