GRAPHTEC LABELROBO LCX603, Руководство по установке

Страница: 61 / 122

LCX603-UM-651-9370 2-53
2 Setup
Cleaning the print head and the platen roller
When there is dirt on the print head or the platen roller, the rub printing appears on the printing result.
When there is dust on the print head or the platen roller, the vertical white lines are appeared.
Clean the print head by the following procedure, and then perform the printing test.
How to clean the print head
(1) Detach the ribbon stocker.
(2) Open the print head section, and gently wipe the heating element section at the tip of the head with
the cleaning stick as shown in the picture below.
Open the print
head area
Cleaning stick
Heating element area
of print head
Since there is the possibility of damaging the head if you rub it forcefully or wipe it with a cloth that has
not been specified, wipe it only with a cleaning stick.
When particularly dirty, apply a little IPA (Isopropyl Alcohol 90% purity or greater) and rub it gently.
So as to not damage it, never strike or scratch it with a sharp or hard object.
Upon performing maintenance, in order to prevent the likes of electrostatic disruption and corrosion,
please do not directly touch the print heads with your hands. Ensure not to do the same for the media
surface that the print heads come into contact with.