GRAPHTEC GL350, Руководство по обслуживанию

Страница: 30 / 58

GL400-UM-251-9370 4-7
4. SETUP PROCEDURES
(10) Re-open the Setup menu as shown below.
Specify the AMP Setup conditions as shown below.
Mode
:Setup2 (Room temp.)
Slot :Slot1
Temperature Sensor :Sensor1
Area
:Area2
CH :CH 3
(11) Repeat steps (4) to (8) for Area2 of Sensor1.
(12) If you have the 20-channel input terminal unit, repeat steps (4) to (8) for Sensor2.
(13) If you have the 50-channel input terminal unit, repeat steps (4) to (8) until Area 5 of Sensor2.
(14) Turn off the GL450/400/350.
This completes the Room temp. setup.
Setup flow for the Room temp.
Procedure 10-channel input terminal 20-channel input terminal 50-channel input terminal
1
Sensor 1
Area 1 Sensor 1
Area 1 Sensor 1
Area 1
2
Sensor 1
Area 2 Sensor 1
Area 2 Sensor 1
Area 2
3 None
Sensor 2
Area 1 Sensor 1
Area 3
4 None
Sensor 2
Area 2 Sensor 1
Area 4
5 None None
Sensor 1
Area 5
6 None None
Sensor 2
Area 1
7 None None
Sensor 2
Area 2
8 None None
Sensor 2
Area 3
9 None None
Sensor 2
Area 4
10 None None
Sensor 2
Area 5