background image

39

What the Hi-Flame Warranty covers

• Bodywork
• Doors, Door Handles and Door Hinges
• Flue collar
• Primary, Secondary and Tertiary Air 
Controls
• Ash Pan and Multi-Purpose Tool

HI-Flame guarantee that your product 
will be free from defective parts, 
materials and workmanship at the time 
of purchase by the original consumer 
for a period of 1 year for components, 
bodywork casing, door and boiler (parts 
and labour), excluding consumable 
parts. The optional further 4 Year 
Extended Warranty for the bodywork 
casing, door and boiler (parts only) is 
only applicable if the Warranty Card has 
been completed in full (including the 
Installer / installation requirements) and 
it has been posted to Hi-Flame for our 
records. 
Hi-Flame will repair or replace at its 
option any stove or stove part thereof 
found to be defective under these 
Warranty Terms and Conditions.

What the Hi-Flame Warranty DOES 
NOT cover

In line with other manufacturers the 
Warranty does not cover the following 
‘consumable’ items
• Fire Ropes and Gasket Seals
• Heat Resistant Glass
• Baffle / Throat plate
• Fire Grate and Fire Grate Carrier 
Frame
• Firebricks and Fire-cemented Joints 

• Painted surfaces

The Warranty does not cover an 
illegally installed stove

 (see point 1 

above).

 

The Warranty does not cover parts 
deemed to be consumables which  
include paint, firebricks, fire grates,  
vermiculite panels, smoke deflection 
plates (baffle plates), gaskets, rope seals 
and heat-resistant glass. 

Limits of Warranty

The Hi-Flame Warranty is not 
transferable and applies to the original 
retail purchaser only. It does not cover 
the failure of the appliance due to 
accidental damage, misuse or abuse, 
modification, illegal installation, repairs 
(other than those by the authorised 
dealer) or failure to maintain the stove 
in a serviceable condition.
Under no circumstances shall  
Hi-Flame be liable for any incidental 
or consequential damage claims of 
any nature whatsoever arising from 
the non-conformance of the stove 
under the terms of the manufacturer’s 
Warranty. These include loss of profit, 
commercial losses, transport costs 
and damage during transport, costs 
in connection with any dismantling 
and reassembling of the stove and its 
installation components.

The terms and conditions of the 
warranty do not affect, nor or they 
intended to affect, your  
statutory rights

Содержание GR905









































Отзывы: