Graphite 58G792, Инструкция по эксплуатации

Страница: 12 / 96

12
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
ELECTRIC DRILL DRIVER
58G792
NOTE: BEFORE THE TOOL IS USED FOR THE FIRST TIME, READ THIS INSTRUCTION MANUAL AND KEEP IT FOR
FUTURE REFERENCE.
DETAILED SAFETY REGULATIONS
WARNING : Safety regulations must be observed, when the device is operated. This instruction manual and
general safety information should be read for your own and bystanders’ safety, before the tool is operated.
This instruction manual should be kept for future reference.
REMEMBER : The operator or user is responsible for accidents or hazards occurring to other people or the
environment.
When the tool is operated, work safety and hygiene regulations in force should be strictly observed.
●
Before operation is commenced, check the unwound power cord for damage or wear.
●
Before connecting to the power source, always make sure the supply voltage is compatible with the
●
value specified on the nameplate of the tool.
The tool can be connected only to an electrical system equipped with a differential current protection
●
that will cut the power off when earth leakage current exceeds 30 mA in less than 30 ms.
Do not allow the tool to be operated by children and people not familiarized with the instruction
●
manual.
Before you begin working, make sure there is enough free space and proper lighting over the work
●
station.
Check the workpiece for correct fastening.
●
Do not use the tool in rooms with explosive atmospheres.
●
Make sure that ventilation holes of the tool are passable and kept clean during operation.
●
Before cleaning, the tool must be disconnected from power supply. Clean the tool using a brush.
●
Always use eye and ear protection.
●
It is also recommended to use personal protection equipment, such as dust mask and protective
●
apron.
Do not attempt to repair the tool on your own.
●
All repairs should be performed by a qualified person only, or in an authorised service centre, using
●
original spare parts.
NOTE! The tools is intended for indoor works.
Despite using the construction, which is safe by design itself, protection means and additional safety
features, there is always a residual risk of injuries during operation.
CONSTRUCTION AND APPLICATION
The drill and driver is an electric hand tool driven with a single-phase commutator motor, whose speed
is reduced by means of the gear transmission. Power tools of this type are widely used for tightening and
loosening of screws, making holes in wood and wood-like materials, steel, ceramics, etc. The electric drill
and driver can also be used with a series of drill bits, sockets, screwdriver bits of various lengths. The range
of applications of the drill driver include renovation, carpentry, locksmithing and building works, as well as
all types of DIY and around the house works.
The power tool should be used according to its purpose.
DESCRIPTION OF GRAPHIC PAGES
The below list refers to device components shown in the graphic pages of this instruction manual.
Quick-coupling chuck 1.
Torque control ring 2.
Speed change switch 3.
Carbon brush cover 4.
Speed direction switch 5.