17
Speed Screen
Press
M
button at Recall Job mode, and it will advance to MODE 7 Speed.
To activate Low Speed, press 1. An
“*” will appear next to “Low.” Press
Enter
and
the screen jumps to main operation MODE.
To activate High Speed, press 2. An “*” will appear next to “High.” Press
Enter
and
the screen jumps to main operation MODE.
Recalibration Screen
MODE 8 Recalibrate mode. If the crease line gap is stretched or shrunk, the crease
tolerance will be accumulated as crease line increases. To correct, activate
Recalibrate mode.
1. Measure the real length of a paper.
2. Input the actual length of the paper (for example 420mm).
4. Feed the paper. Recalibration is done automatically.
Note
: If the input data is more or less than 3% different from the real length it will
fail.
3. Press
button to run machine.
