Granville-Phillips Convectron 275 series, Инструкция по эксплуатации

Страница: 5 / 40

5
Series 275 Convectron Gauge Bridge Amp PC Board
Instruction Manual - 275331
Chapter 1
1
Safety Instructions
1.1 Safety Introduction
BEGIN BY READING THESE IMPORTANT SAFETY INSTRUCTIONS AND NOTES collected here for
your convenience and repeated with additional information at appropriate points in these
instructions.
NOTE: These instructions do not and cannot provide for every contingency that may arise in
connection with the installation, operation, or maintenance of this product. If you require further
assistance, contact MKS, Granville-Phillips Division at the address on page 2 or the back cover of this
instruction manual.
This product is designed and tested to offer reasonably safe service provided it is installed, operated, and serviced in strict
accordance with these safety instructions.
These safety precautions must be observed during all phases of operation, installation, and service
of this product. Failure to comply with these precautions or with specific warnings elsewhere in this
manual violates safety standards of design, manufacture, and intended use of the instrument. MKS
Instruments, Inc. disclaims all liability for the customer's failure to comply with these requirements.
• Read Instructions – Read all safety and operating instructions before operating the product.
• Retain Instructions – Retain the Safety and Operating Instructions for future reference.
• Heed Warnings – Adhere to all warnings on the product and in the operating instructions.
• Follow Instructions – Follow all operating and maintenance instructions.
• Accessories – Do not use accessories not recommended in this manual as they may be hazardous.
These safety alert symbols in this manual or on the Product rear
panel mean possible danger of electric shock or caution − personal
safety or property damage. Read these instructions carefully.
Failure to comply with these instructions may result in serious personal injury,
including death, or property damage.
The service and repair information in this manual is for the use of Qualified
Service Personnel. To avoid shock, do not perform any procedures in this
manual or perform any servicing on this product unless you are qualified to do
so.
To reduce the risk of fire or electric shock, do not expose this product to rain
or moisture.
Objects and Liquid Entry − Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short out
parts that could result in a fire or electric shock. Be careful not to spill liquid of
any kind onto the products.