GRANULDISK Granule Gastro Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 51

GRANULDISK Granule Gastro Скачать руководство пользователя страница 42

4 HACCP Hygiene and Operation

4.2 Reading the data through the

4.2 Reading the data through the control

panel

11 Press STOP button (2), release it and wait 3 seconds.
22 Press “Short program” (4), five times.
33 Use button “ECO program” (3) or button “Normal program (5) until you

see “read operating data” in the display. Confirm your choice by press-

ing Confirm button (1).

44 Operating data for the last program run is shown in the display;

200121

15:19

SG

65/85

OK

The information is defined as follows:
• Date; 200121 2020, January, 21st
• Time; 15.19 3.19 p.m
• Program type; E, S, N equivalent to Eco, Short and Normal program
• Washing with granules; indicated by means of a “G”, otherwise this

box is left blank

• 65; indicates the average temperature in the wash tank during

washing.

• 85; indicates the minimum temperature in the rinse tank during

rinsing

• OK; indicates that you rinse with volume i.e. full volume (the programs

that are preset for this are Short and Normal). “NA” (not applicable)

will be shown if you rinse on time, i.e. not the entire volume (the pro-

grams that are preset for this are ECO and all COMBI/PLUS modes).

NOTE

If the wash program has been cancelled due to an oper-

ating error or technical error, the temperature indication is

not included and “error” plus an error code appears in its

place.

200121

15:19

SG

Error

103

55 To view information on program run previously, scroll backwards and

forwards in the list using button “ECO program” (3) or button “Normal

program” (5).

66 To end scrolling and leave the list, press Confirm button (1).
77 Press the STOP button (2) to return to operating mode.

42

Rev. 2021-12

«
...
40
41
42
43
44
...
»

Содержание Granule Gastro




















































Отзывы:

Нет отзывов