GRANULDISK Granule Gastro Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 51

GRANULDISK Granule Gastro Скачать руководство пользователя страница 28

2.4 Start and operation

WARNING

The hood can not be opened until the wash program is

complete.

55 Close the hood by pressing button (8) if you are not running another

wash program straight away. It saves energy and reduces evaporation

from the wash tank.

Stopping the machine while in operation

• Switch to washing with water for about 30 seconds in order to rinse off

all granules. Then press STOP (2).

• In an emergency: Just press STOP (2).

NOTE

Utensils may have remains of detergent and should be

washed again before they are taken out of the machine.

Never drain an emergency stopped machine! (granules

left in the pump without water will jam the pump impeller.)

Resetting of overheat protection

Reset overheat protection if error codes 104 and 105 occur.
11 Empty the wash tank.
22 Clean the level sensor.
33 Unscrew the black cap.

Fig. 20 Access to overheat protectors

44 Reset the overheat protection

using a small screwdriver to

stick into the protector and

push the reset button. If the

protection has tripped, a click

is heard when it is reset.
See Fig. 20

Access to over-

heat protectors

55 If the error code recurs in the next few hours, contact a service engineer.

28

Rev. 2021-12

«
...
26
27
28
29
30
...
»

Содержание Granule Gastro




















































Отзывы:

Нет отзывов