Grant's Automation IPI-101 Скачать руководство пользователя страница 13

Страница: 13 / 24

Page 13

Setting Up the IPI-101

Before the IPI-101 will work it needs to be connected to a router with a cable or WiFi and the router must have an Internet

connection if it is to call a Smart Phone away from home. The installer will need a Desktop or Laptop computer to set

everything up.

Step One:

The IPI-101 must be setup so it is connected to a router with an ethernet cable or WiFi before anything else can be set

up.

Step Two:

Smart Phones and Tablets must have an App installed if they are to work with the IPI-101.

Step Three:

Add devices that are to work with the IPI-101 and set these up.

The IPI-101 must have an IP address that is compatible with the network it is to work on. The network router is the device

that makes the network happen and is the device other devices are plugged into if wired connections are used or where

the WiFi comes from for wireless devices. IP addresses are what are used to identify devices on the network and are

made up of four groups of numbers each separated with dots such as: 192.168.1.110 or 10.0.0.110. The last number of

the IP address must be different on each device and the first three numbers must be the same. To find an IP Address on

your network use a Smart Phone that is already connected to the network go to settings/WiFi/info for an iPhone or iPad

or settings/connectings/WiFi or settings/WiFi and tap the icon for your WiFi for Android devices, which will give you the

IP Address of the device. If the first three numbers are the same as the IPI-101 then it will work as is. If they’re different

you will need to change the IP address of the IPI-101. Same goes for any Outdoor Access Points that may be used to

boast the WiFi range.

Connecting the IPI-101 to your Network

Because the IPI-101 doesn’t have a display or keyboard you will need to plug it into a computer directly with an ethernet

cable to make any changes. You’ll also need to power the IPI-101 up with a 12VDC 1A power adaptor or other power

source. This is best done on a table or bench. If your computer doesn’t have an ethernet port you can get an adaptor

that provides one from a USB Port.

An Ethernet Cable

Where the Ethernet Cable plugs into a

typical Laptop Computer

Where the Ethernet Cable Plugs into a typical

Desktop Computer

Laptop or Desktop

Computer

12VDC Power

Adaptor or other

power source

IPI-101

Ethernet Cable

Changing the IP Address of the IPI-101

Содержание IPI-101

























Результаты поиска

Содержание IPI-101

Отзывы:

Бренды по названию

Популярные бренды

Grant's Automation IPI-101, Руководство по установке

Результаты поиска

Содержание IPI-101

Отзывы:

Бренды по названию

Популярные бренды