Compressor Operating Instructions
61099049
4
If you have no experience with such equipment, you should first get assistance from
experienced people.
Keep all supplied documents with the equipment for future reference if required. Keep the
purchase receipt for any warranty claims.
If you lend or sell the equipment, supply all documentation with it.
Observe the operating and maintenance instructions found in this manual.
Maintenance should be performed at the prescribed intervals and in the prescribed scope.
Following maintenance work, all dismantled protective devices must be properly
reinstalled. The protective devices and their protective functions should be inspected by a
competent person before using the machine.
Defective equipment must be repaired promptly in order to minimize the extent of damage
and avoid endangering the safety of the equipment.
The compressor may only be used and operated under the conditions laid down in these
operating instructions.
Retrofits, changes or modifications to the equipment are strictly prohibited. They require
consultation with and written approval by the manufacturer.
If during operation (residual) hazards and risks become apparent which are not described
in this manual, the operator is obliged to report this to the manufacturer.
Do not change the setting of the safety valve. Before each use, check that the equipment
is functioning properly and that the lines are not leaking.
Compressed air under high pressure can cause severe or fatal injury! If injured contact a
physician immediately!
Before each use always perform a visual and a function check of the equipment to identify
damage and worn parts, and arrange for their repair by trained personnel before use.
After opening the packaging check that all components are complete and undamaged. If
components are missing or damaged, contact your dealer immediately and use the device
only after approval by the dealer.
Warning: Clogged oil filters or valve failure will result in insufficient lubrication.
Make sure that the oil cooling devices are kept clean and that the protective equipment
remains in working order.
Warning: All hoses and fittings of road-driven compressors must be suitable for use on
construction sites at the maximum allowable pressure.
It is recommended that feed hoses be fitted with a safety cable, e.g. a wire rope, for
pressures above 7 bar.
The machine must always be placed on a level and horizontal surface and may not be
tilted.
