O
perating Instructions for Digital Fence Tester
580580479
7
5.2
Voltage test
1.
Insert the earth spike (4) into the ground.
2.
Hold the test probe (1) against the fence wire
3.
Press the push button (3) permanently to perform a measurement.
4.
Read the measured value on the display (2). e.g. 6.0 = 6,000 V
When taking the measurement, only touch the push-button of the
equipment and never touch the ground spike, the supply cable,
the ground or any part of the electric fence.
Otherwise there is a risk of electrocution with life-threatening
consequences.
A doctor must always be consulted after electrocution.
People with active implants, e.g. pacemakers, etc. should not
carry out the voltage measurement.
Discuss the procedure with your doctor before carrying it out.
If the safety of the user cannot be guaranteed, the equipment
must be switched off and secured against unintentional use.
The fence voltage should be at least 2.0 = 2,000V in order to
ensure the safety of the fence.
For measured values above 12,000 V (12.0)
the display shows “HI”!
6
Maintenance and care
The measuring instrument does not require any special maintenance when operated as
intended.
If a malfunction occurs, stop the current measurement immediately and have the equipment
checked by an expert before it is used again.
•
Maintenance and repair work may be performed only by qualified personnel.
•
Use only original spare and wear parts
•
Maintenance, cleaning and troubleshooting work is only permitted when the batteries are
removed and the unit is not live.
