Operating Instructions for Multi-Monitor-System
5070010848
6
Before connecting to the vehicle’s electrical system, the battery must be disconnected from
the vehicle. The power supply connection point must be coordinated with the vehicle
manufacturer or the vehicle operating manual. Connection work may only be carried out by
trained specialists.
4.2
Initial start up
Symbols on the display:
DANGER: Note that the camera is only a support and the driver is never to be ruled
out of its duty of care. Carelessness can result in serious accidents with high
property losses and to fatal injury.
DANGER: The operation must be only carried out when the vehicle is stationary.
Distractions can cause serious accidents.
1)
Image settings:
1.
Brightness setting 0-9 steps (left / right key adjustment)
2.
Contrast setting: 0-9 steps (left / right key adjustment)
3.
Color setting: 0-9 steps (left / right key adjustment)
This feature can only be controlled by the RX1 display.
2)
Mirror settings:
Set the four states of the camera image:
Original, horizontally mirrored, vertically mirrored, horizontally and
vertically mirrored. Use the “Left/Right” arrow buttons to select the
desired image for the respective camera.
3) Function setting:
1. NC
2. Turning the ambient light mode of the LED screen on and off;
3. Reversing Ruler Setting: Set the RX1/ RX2/ RX3/ RX4 channel
reversing scale to open and close.
4) SD card storage settings:
1. NC
2. NC
Image settings
Automatic
conversion
settings
Function settings
Save time
settings
Play
settings
Pairing
