Operating Instructions for Multi-Monitor-System
5070010848
5
3.2
Technical parameters
Display device
Color TFT-LCD
Size
7" Digital Screen
Operation frequency
2400~2483.5MHz
Receiving sensitivity
≤-86dBm(1MHZ QPSK MD300RE)
Resolution
800×(RGB)×480
View angle (LR/UD)
L/R: 70/70 U/D: 50/70
Contrast ratio
500:1
Luminance (cd/m2)
450
Response time (ms)
25
Load dump
DC 12+87V/400ms
Operating temperature
-20
℃
～
+70
℃
Storage temperature
-30
℃
～
+80
℃
operating voltage range upply
DC8V
～
32V
（
5W Max
）
Dimension(L x W x T)
(218X149X82mm)
Transmission power
18dBm with Power control
Camera
Color CMOS Camera
Image pick-up device
1/3" Color CMOS
Picture elements
NTSC:720(H)X480(V);PAL:720(H)X480(V)
Horizontal resolution
500 TV Lines
Minimum illumination
0 Lux At Night ( IR LED ON)
View angle
120°
Waterproof rating
IP69K
Shockproof rating
10G
operating voltage range
DC11~32V
Dimension
106(W) x 75(H) x 70.4(D) mm
4
Operating the video system
4.1
Establishing a connection between the monitor and the camera
After opening the packaging check that all components are complete and undamaged. If
components are missing or defective, contact your dealer immediately and do not use the
device until its use has been approved by your dealer.
Before first use, the monitor must be connected to at least one camera.
1)
Loosen the screw on the back of the camera using a Phillips screwdriver (size PH1). Use
a needle or other pointed object to press the connection button under the screw.
2)
Turn on the monitor and camera, go to the Monitor menu and select the device connection
icon. Press the Enter button. The display shows “PAIRING START 30” and a countdown
starts.
3)
Press the connection button on the back of the camera. Wait a few seconds until the
display switches to the camera display.
4)
Repeat steps 1-3 to connect additional monitors.
Connection button
