1. Introduction
2. Power over Ethernet (PoE) & Features
The 5-Port Gigabit PoE+ Switch is an unmanaged Gigabit Ethernet PoE+ switch designed to enhance workgroup
performance while providing a high level of flexibility. It provides 5 x 10/100/1000Mbps ports and 4 IEEE802.3at
Power over Ethernet (PoE+) ports for workstation, It is an ideal solution for small office and home users to utilize a
combination of Gigabit PoE and non-PoE device. The switch automatically detects IEEE 802.3at compliant devices
and provides power and data over a single cable.
The 5-Port Gigabit PoE switch is a PSE (Power Source Equipment) and fully compatible with PDs (Powered Devices)
that comply with the IEEE 802.3at PoE+ standard. The 5-Port Gigabit PoE Switch enables users to attach IEEE802.3at
compliant devices such as wireless Access Points (WAP), VOIP phones, IP cameras, printers and Network Attached
Storage (NAS) directly to the 5-Port Gigabit Ethernet PoE Switch without requiring additional power to the
device. The unit is designed for home and small business users in mind and is ideal for installations where AC
power is not available or not cost-effective.
No configuration is required and installation is quick and easy. Support for Auto – MDI / MDI-X on all the ports
eliminate the need for crossover connection to another switch or HUB. Auto - Negotiation on each port senses the
link speed of a network device ( either10/100/1000 Mbps) and intelligently adjusts for compatibility and optimal
performance.
* 1-Year Limited Warranty for switch and 1-Year Limited Warranty for the power adaptor are available
* This device is designed for indoor use. Do not use outdoors.
Power Over Ethernet (PoE):
Power over Ethernet (PoE & PoE+) integrates 55V power and data onto one single cable, eliminating
the need to have AC power available at all device locations. Power and Data are integrated
onto the same cable, supporting category 5/5e/6 up to 100 Meters. PoE provides power to
PoE compatible devices, such as VOIP telephones, wireless access points (WAP), and IP security
cameras. PoE devices are already in the market, saving up to 50% of overall installation cost by
eliminating the need to install separate electrical wiring and power outlets.
Features:
•5 x 10/100/1000Mbps Auto-negotiation Fast Ethernet RJ-45 ports with 4-Port PoE+ ( port 1 ~ port 4)
•Compliant with IEEE 802.3at
•Supports PoE power up to 104W (at) for all PoE ports.
•Supports PoE IEEE802.3at compliant Powered Device (PD)
•Each port supports auto MDI/MDIX, so there is no need to use cross-over cables.
•Full/half duplex transfer mode for each port.
• Wire speed reception and transmission.
•Up to 2K unicast address entities per device. Self-learning, and table aging.
•9216-byte jumbo packet length.
5-Port Ethernet Gigabit PoE Switch Rev 1.0 01/03/2013 Page 2 OF 7
