Group Paging Parameters
Paging function
: Enable or disable the Group paging function.
Default group
: The group used to transmit an outgoing page if the user does not explicitly specify a group.
Priority group
: The group assigned for priority pages.
Emergency group
: The group assigned for emergency pages.
Accept while busy
: If no, incoming Group paging sessions do not produce standard call waiting. If yes, incoming PTT sessions produce
standard call waiting behavior on the active audio group.
Caller ID(*)
:Caller ID number for identi cation.
P-Time
: The audio payload size in milliseconds.
Audio codec
: The audio codec to use for outgoing Group paging broadcasts. Incoming Group paging audio will be decoded according to
the codec speci ed in the incoming message.
group
: Set the group whether to be available, transmit, subscribe, join group and the group name.
IGMP Settings
Users could specify how often the phone will report IGMP when PTT/ Paging function is turned on. IGMP reporter help to keep PTT/ Paging
receivable in dormant state. The interval may take some effect to standby time. The default setting is 30 s.
Figure 61: IGMP
setting
UPGRADING AND PROVISIONING
The WP810/WP822/WP825 can be upgraded via TFTP/HTTP/HTTPS by con guring the URL/IP Address for the TFTP/HTTP/HTTPS server and
selecting a download method. Con gure a valid URL for TFTP, HTTP or HTTPS; the server name can be FQDN or IP address.
Examples of valid URLs:
rmware.grandstream.com/BETA
fw.mycompany.com
Upgrade and Provisioning Configuration
There are two ways to setup upgrade and provisioning on WP810/WP822/WP825. They are Keypad Menu and Web GUI.
Configure via keypad Menu
1. In handset Settings, select
Advanced Settings
🡪
System Upgrade
.
2. Navigate to
Firmware/Con g
and con gure the rmware upgrade and con g settings.