Priority channel
: The channel assigned for priority pages.
Emergency channel
: The channel assigned for emergency pages.
Accept while busy
: If no, incoming PTT sessions do not produce standard call waiting. If yes, incoming PTT sessions produce standard call
waiting behavior on the active audio channel.
CallerID(*)
: Caller ID number for identi cation.
PTime
: The audio payload size in milliseconds.
Audio codec
: The audio codec to use for outgoing PTT broadcasts. Incoming PTT audio will be decoded according to the codec speci ed
in the incoming message.
Channel
: Set the channel whether to be usable, transported, acceptable, joined and the channel display name.
Group Paging
Enabling Group Paging Feature
You can enable and specify settings for the Group Paging feature through the phone’s user interface.
To specify the Group Paging feature settings:
1. Using your phone’s interface, navigate to the Group Paging Con guration menu by pressing
Settings
🡪
Advanced setting
🡪
PTT and
paging
🡪
PTT and group paging
.
2. Choose Group Paging Con guration.
3. Set Group Paging function to Enabled.
Please, refer to the following screenshots:
Figure 60: Group Paging
To send a Group Paging broadcast:
1. Unlock your handset.
2. Press the Talk soft key.
3. Set Default mode to Group paging.
4. Scroll to the group you wish to send a broadcast to.
5. Press and hold the Talk soft key before speaking.
The group status will change to Sending group paging to indicate you are transmitting.
The devices which are in the group will receive the paging.
. Release the Talk soft key, press the on-hook/power key when you have nished speaking.