Grandstream Networks UCM6102 Скачать руководство пользователя страница 230

Страница: 230 / 308

Firmware Version 1.0.9.26

UCM6100 Series IP PBX User Manual

Page 229 of 305

CALLBACK FEATURE

Callback is mainly designed for users who often use their mobile phones to make long distance or

international calls which may have high service charges. The callback feature provides an economic

solution for reduce the cost from this.

The callback feature works as follows:

1. Configure a new callback on the UCM6100.

2. On the UCM6100, configure destination of the inbound route for analog trunk to callback.

3. Save and apply the settings.

4. The user calls the PSTN number of the UCM6100 using the mobile phone, which goes to callback

destination as specified in the inbound route.

5. Once the user hears the ringback tone from the mobile phone, hang up the call on the mobile phone.

6. The UCM6100 will call back the user.

7. The user answers the call.

8. The call will be sent to DISA or IVR which directs the user to dial the destination number.

9. The user will be connected to the destination number.

In this way, the calls are placed and connected through trunks on the UCM6100 instead of to the mobile

phone directly. Therefore, the user will not be charged on mobile phone services for long distance or

international calls.

To configure callback on the UCM6100, go to web GUI->

PBX

Call Features

Callback

page and click

. Configuration parameters are listed in the following table.

Table 73: Callback Configuration Parameters

Name

Configure a name to identify the Callback.

CallerID Pattern

Configure the pattern of the callers allowed to use this callback. The caller

who places the inbound call needs to have the callerID match this pattern

so that the caller can get callback after hanging up the call.

Note:

If leaving as blank, all numbers are allowed to use this callback.

Outbound Prepend

Configure the prepend digits to be added at before dialing the outside

number. The number with prepended digits will be used to match the

tbound route. ‘-’ is the connection character which will be ignored.

Содержание UCM6102





















































































































































































































































































































Результаты поиска

Содержание UCM6102

Отзывы:

Похожие инструкции для UCM6102

Бренды по названию

Популярные бренды

Grandstream Networks UCM6102, Руководство пользователя

Результаты поиска

Содержание UCM6102

Отзывы:

Похожие инструкции для UCM6102

Бренды по названию

Популярные бренды