P a g e
|
39
HT801 Administration Guide
UPGRADE PROTOCOL
Select the menu option 15 to choose firmware and configuration upgrade protocol between TFTP
/ HTTP and HTTPS.
FIRMWARE UPGRADE MODE
Select voice menu option 17 to choose firmware upgrade mode among the following three options:
1) Always check, 2) check when pre/suffix changes, and 3) never upgrade.
Register a SIP Account
The HT801 supports 1 FXS port which can be configured with 1 SIP account. Please refer to the following
steps in order to register your accounts via web user interface:
1.
Access your HT801 web UI by entering its IP address in your favorite browser.
2.
Enter your admin password (default: admin).
3.
Press
Login
to access your settings.
4.
Go to
FXS Port
page.
5.
In
FXS Port
tab, set the following:
a.
Account Active
to
Yes.
b.
Primary SIP Server
field with your SIP server IP address or FQDN.
c.
Failover SIP Server
with your Failover SIP Server IP address or FQDN. Leave empty if not available.
d.
Prefer Primary SIP Server
to
No
or
Yes
depending on your configuration. Set to
No
if no Failover
SIP Server is defined. If “
Yes”
, account will register to Primary SIP Server when failover registration
expires.
e.
Outbound Proxy:
Set your Outbound Proxy IP Address or FQDN. Leave empty if not available.
f.
SIP User ID
: User account information, provided by VoIP service provider (ITSP). Usually in the form
of digit similar to phone number or actually a phone number.
g.
Authenticate ID
: SIP service subscriber’s Authenticate ID used for authentication. Can be identical
to or different from SIP User ID.
h.
Authenticate Password
: SIP service subscriber’s account password to register to SIP server of ITSP.
For security reasons, the password will field will be shown as empty.
i.
Name
: Any name to identify this specific user.
For more information, related to above options please refer to
FXS Port Settings.
6.
Press
Apply
at the bottom of the page to save your configuration.
