Grandstream Networks GXW-4024 Скачать руководство пользователя страница 24 | Manualshive

Страница: 24 / 35

Grandstream Networks GXW-4024 Скачать руководство пользователя страница 24

Grandstream Networks, Inc.

GXW4024 User Manual

Page 24 of 35

Firmware 1.0.1.8

Last Updated: 5/2008

Syslog Level

Select the GXW4024 to report the log level. Default is NONE. The level is one of DEBUG, INFO,
WARNING or ERROR. Syslog messages are sent based on the following events:

1.  product model/version on boot up (INFO level)
2.  NAT related info (INFO level)
3.  sent or received SIP message (DEBUG level)
4.  SIP message summary (INFO level)
5.  inbound and outbound calls (INFO level)
6.  registration status change (INFO level)
7.  negotiated codec (INFO level)
8.  Ethernet link up (INFO level)
9.  SLIC chip exception (WARNING and ERROR levels)
10.  memory exception (ERROR level)

The Syslog uses USER facility. In addition to standard Syslog payload, it contains the following
components:

GS_LOG: [device MAC address][error code] error message

Example

: May 19 02:40:38 192.168.1.14 GS_LOG: [00:0b:82:00:a1:be][000] Ethernet link is up

Primary RADIUS
Server

IP Address or FQDN of the primary RADIUS Server

Primary RADIUS
Auth Port

Primary Radius server authentication port. Default value is 1812

Primary RADIUS
Acct Port

Primary Radius server accounting port. Default value is 1813

Primary Radius
Server Secret

Special secret string should be preconfigured according to RADIUS Server configuration

Secondary
RADIUS Server

IP Address or FQDN of the secondary RADIUS Server

Secondary
RADIUS Auth Port

Secondary Radius server authentication port. Default value is 1812

Secondary
RADIUS Acct Port

Secondary Radius server accounting port. Default value is 1813

Secondary Radius
Server Secret

Special secret string should be preconfigured according to RADIUS Server configuration

RADIUS Timeout

Default value is 2 seconds. The time between retries the GXW will send “Access-Request”
message to RADIUS server in purpose to authenticate it.

RADIUS Retry

Default value is 3 times. Number of times the device will try to authenticate itself with
preconfigured RADIUS server during initialization process.

Download Device
Configuration

This setting allows user to download a text file containing all the P values of each setting as
configured on the unit.

«
...
22
23
24
25
26
...
»

Содержание GXW-4024




































Отзывы:

Нет отзывов