Grandstream Networks GXW-4024, Руководство пользователя, Страница: 10 / 35

Grandstream Networks, Inc. GXW4024 User Manual Page 10 of 35
Firmware 1.0.1.8 Last Updated: 5/2008
B
ASIC
O
PERATIONS
U
NDERSTANDING
GXW V
OICE
P
ROMPTS
GXW4024 has a built-in voice prompt menu for simple device configuration. To enter the voice prompt
menu,
Press *** on the standard analog phone connected to ANY FXS port.
T
ABLE
5: D
EFINITIONS OF THE
GXW V
OICE
P
ROMPTS
Menu Voice Prompt User’s Options
Main Menu “Enter a Menu Option” Enter “*” for the next menu option
Enter “#” to return to the main menu
Enter 001 – 005, 007,010 – 017, 047, 086 or 099 Menu option
001 “DHCP Mode”, “PPPoE
Mode ”or “Static IP Mode” Enter ‘9’ to toggle the selection
If user selects “Static IP Mode”, user need configure all the IP
address information through menu 002 to 005. If user selects
“Dynamic IP Mode”, the device will retrieve all IP address
information from DHCP server automatically when user reboots
the device.
002 “IP Address “ + IP address The current IP address is announced
Enter 12-digit new IP address if in Static IP Mode.
003 “Subnet “ + IP address Same as Menu option 002
004 “Gateway “ + IP address Same as Menu option 002
005 “DNS Server “ + IP address Same as Menu option 002
007 Preferred Vocoder Enter “9” to go to the next selection in the list:
•
PCMU
•
PCMA
•
iLBC
•
G-726
•
G-723
•
G-729
010 “MAC Address” Announces the MAC address of the unit.
013 Firmware Server IP Address Announces current Firmware Server IP address.
Enter 12 digit new IP address.
014 Configuration Server IP
Address Announces current Config Server Path IP address. Enter 12-digit
new IP address.
015 Upgrade Protocol Upgrade protocol for firmware and configuration update. Enter “9”
to toggle between
TFTP , HTTP and HTTPS
016 Firmware Version Firmware version information.
017 Firmware Upgrade Firmware upgrade mode. Enter “9” to rotate among the following
three options:
1. always check
2. never upgrade
047 “Direct IP Calling” Enter the target IP address to make a direct IP call, after dial
tone. (See “
Make a Direct IP Call ”.)
701724 Phone calls between different
ports of the same GXW in
case no SIP server is in use User can make internal calls between different ports inside the
same GXW even without being registered to SIP server. By
dialing *** and 7xx user can reach colleague connected to port
“xx”
086 Voice Mail Announces the number of voice mails available
099
“RESET” Enter “9” to reboot the device; or
Enter MAC address to restore factory default setting
(See
Restore Factory Default Setting section)
“Invalid Entry” Automatically returns to Main Menu