Firmware Version 1.0.1.54
GXV3240D Administration Guide
Page 40 of 83
ACCOUNT/SIP SETTINGS
SIP Registration
Selects whether or not the phone will send SIP Register messages to
the proxy/server. The default setting is "Yes".
Unregister Before New
Registration
If set to "All", the SIP user's registration information will be cleared
when the phone would start pre-registration. The SIP Contact header
will contain "*" to notify the server to unbind the connection. The
default setting is "No".
Register Expiration(m)
Specifies the frequency (in minutes) in which the phone refreshes its
registration with the specified registrar. The default setting is 60. The
maximum value is 64800 minutes (about 45 days).
Wait Time Retry
Registration(s)
The amount of time (in seconds) in which the phone will retry the
registration process in the event that is failed. The default settingis
20.The maximum value is 3600 seconds.
Local SIP Port
Defines the local SIP port used to listen and transmit. The default
setting is 5060 for Account 1, 5062 for Account 2, 5064 for Account 3,
5066 for Account 4, 5068 for Account 5, and 5070 for Account 6. The
valid range is from 5 to 65535.
SUBSCRIBE for MWI
When set to "Yes", a SUBSCRIBE for Message Waiting Indication will
be sent periodically. The phone supports synchronized and
non-synchronized MWI. The default setting is "No".
Session Expiration(s)
The SIP Session Timer extension (in seconds) that enables SIP
sessions to be periodically "refreshed" via a SIP request (UPDATE, or
re-INVITE). If there is no refresh via an UPDATE or re-INVITE
message, the session will be terminated once the session interval
expires. Session Expiration is the time (in seconds) where the session
is considered timed out, provided no successful session refresh
transaction occurs beforehand. The default setting is 180. The valid
range is from 90 to 64800.
Min-SE(s)
The minimum session expiration (in seconds). The default setting is
90. The valid range is from 90 to 64800.
UAC Specify Refresher
As a Caller, select UAC to use the phone as the refresher; or select
UAS to use the Callee or proxy server as the refresher. The default
setting is "Omit".
UAS Specify Refresher
As a Callee, select UAC to use caller or proxy server as the refresher;
or select UAS to use the phone as the refresher. The default setting is
"UAC".
