Grandstream Networks, Inc.
GXV3174 USER MANUAL
Page 34 of 68
FIRMWARE VERSION 1.0.0.32
Updated : 11/2010
Part Number
This field contains the product part number.
Serial Number
This field contains the product serial number.
Software Version
• Program: This is the main firmware release number, which is
always used for identifying the software (or firmware) system of the
phone.
• Boot: Booting code version number.
• Core: Core code version number.
• DSP: DSP code version number.
• Base: Base code version number.
• GUI-A, GUI-B: GUI interface version number.
• Recover Image: Recover image version number.
• Supplement: Supplement version number.
System Up Time
This field shows system up time since the last reboot.
ADVANCED SETTINGS PAGE DEFINITIONS
Advanced Settings/General Settings
Local RTP Port
This parameter defines the local RTP-RTCP port pair used to listen and
transmit. It is the base RTP port for channel 0. When configured, for audio,
channel 0 will use this port _value for RTP and the por1 for its
RTCP; channel 1 will use por4 for RTP and por5 for its
RTCP. For video, channel 0 will use por2 for RTP and
por3 for its RTCP; channel 1 will use por6 for RTP and
por7 for RTCP. The default value is 5004.
Use Random Port
When set to YES, this parameter will force random generation of both the
local SIP and RTP ports. This is usually necessary when multiple GXV-
3174s are behind the same full cone NAT. The Default setting is YES. (This
parameter must be set to NO before Direct IP Calling will work)
Keep-alive Intervals (s)
This parameter specifies how often the GXV-3174 sends a blank UDP
packet to the SIP server in order to keep the “ping hole” on the NAT router
to open. The default setting is 20 seconds.
STUN Server
The IP address or Domain name of the STUN server. STUN resolution
results are displayed in the STATUS page of the Web UI. Only non-
symmetric NAT routers work with STUN.
Default STUN server: stun.ipvideotalk.com
Use NAT IP
The NAT IP address used in SIP/SDP messages. This field is blank at the
default settings. This should ONLY be used if your ITSP requires it.
SSL Certificate
This defines the SSL certificate needed to access certain websites.
SSL Private Key
This defines the SSL Private key.
SSL Private key Password
This defines the SSL private key password.
Advanced Settings/Call Features
Disable Call-Waiting
The default setting is No. If set to Yes, the call waiting feature will be
disabled.
Disable Call-Waiting
The default setting is No. If set to Yes, the call waiting tone will be
