FIRMWARE VERSION 1.0.5.2 GXP1160/GXP1165 USER MANUAL
Page 41 of 59
proxy server will act as an intermediary to route the packets to the
destination.
Time Zone
Configures the date/time used on the phone according to the specified
time zone.
Self-Defined Time Zone
This parameter allows the users to define their own time zone.
The syntax is:
std offset dst [offset], start [/time], end [/time]
Default is set to:
MTZ+6MDT+5,M4.1.0,M11.1.0
MTZ+6MDT+5
This indicates a time zone with 6 hours offset with 1 hour ahead which is
U.S central time. If it is positive (+) if the local time zone is west of the
Prime Meridian (A.K.A: International or Greenwich Meridian) and
negative (-) if it is east.
M4.1.0,M11.1.0
The 1st number indicates Month: 1,2,3.., 12 (for Jan, Feb, .., Dec)
The 2nd number indicates the nth iteration of the weekday: (1st Sunday,
3
rd
Tuesday…)
The 3rd number indicates weekday: 0,1,2,..,6( for Sun, Mon,
Tues, ... ,Sat)
Therefore, this example is the DST which starts from the First Sunday of
April to the 1st Sunday of November.
Enable Weather Update
Configures to enable or disable weather update on the phone. The
default setting is "Yes". If set to "No", the weather information screen will
not show.
City Code
Configures weather city code for the phone to look up the weather
information. The default setting is "Automatic" and the weather
information will be obtained based on the IP location of the phone if
available. Otherwise, specify the self-defined city code. For example,
USCA0638 is the city code for Los Angeles, CA, United States.
Update Interval
Specifies the weather update interval (in minutes). The default value is
15 minutes.
Degree Unit
Specifies the degree unit for the weather information to display on the
phone.
LCD Contrast
Configures the LCD contrast level (from 0 to 20). The default value is 10.
Date Display Format
Configures the date display format on the LCD. The following formats
are supported:
yyyy-mm-dd:
2012-07-02
mm-dd-yyyy:
07-02-2012
