10/13
(Password is required for this operation)
Firmware Upgrade 2 (FU)
**38*{keypad password}*{server IP address}#
(Password is required for this operation)
Trigger the upgrade of the specified upgrade
firmware path
Get Firmware Upgrade Server Address (FA)
**32#
Broadcast firmware server URL addr
Configuration File Download 1 (CU)
**28*{keypad password}#(Password is required for
this operation)
The phone downloads the configuration
Configuration File Download 2 (CU)
**28*{keypad password}**{prefix}#
(Password is required for this operation)
The phone downloads the configuration
Configuration File Download 3 (CU)
**28*{keypad password}**{prefix}*{postfix}#
(Password is required for this operation)
The phone downloads the configuration
Configuration File Download 4 (CU)
**28*{keypad password}*{server IP address}#
(Password is required for this operation)
The phone downloads configuration from the
specified server
Configuration File Download 5 (CU)
**28*{keypad password}*{server IP address}*
{prefix}#
(Password is required for this operation)
The phone downloads configuration from the
specified server
Configuration File Download 6 (CU)
**28*{keypad password}*{server IP address}*
{prefix}*{postfix}#
(Password is required for this operation)
The phone downloads configuration from the
specified server
View Profile Server Address (CA)
**22#
URL address of phone broadcast configuration file
server
Get TR069 Status (TR)
**87#
Phone broadcast TR069 is available
Reset Network (NR)
**67*{keypad password}#
The phone resets the network configuration
Set Profile Download Protocol Type
**28x#
Set and broadcast the current protocol nameThe
values of X can be: 1, 2, 3, 4, 5TFTP [1]; HTTP [2];
HTTPS [3]; FTP [4]; FTPS [5]
Set the firmware upgrade protocol type
**38x#
Set and broadcast the current protocol nameThe
values of X can be: 1, 2, 3, 4, 5TFTP [1]; HTTP [2];
HTTPS [3]; FTP [4]; FTPS [5]
Get HAC On Status (HAC)
**422#
Broadcast number: 0 (off), 1 (on)
Set HAC on or off (HAC)
**422*x#
Set HAC on or off: 0 (off), 1 (on)
Set Room number
**766*{room number}
Set Room number to be added under : Hotel Service
=>Hotel Room Number
Get Room number
**766#
Return the room number that has been defined
Reset Room number
**766*{keypad pa {room number}#
Reset the hotel room number if number is already in
use , the default keypad password is 123
Enable the UCM zero-configuration number
selection process
**82#
UCM delivers the configuration and sets the room
number as the preferred account to complete the
selection process.
