Outdoor
Ground
Assembly
W06 must be buried in ground.
W06
* Must be
cut flush with frame.
Use decking screws
or concrete anchors
to attach base.
(Fasteners not included).
BASE KIT ASSEMBLY INSTRUCTIONS
Base
Deck or
Patio
Assembly
Base
Base
S03/M01
S03/M01
DECK OR PATIO
INSTALLATION
W06
GRANDIO
T I P
Make sure base is squared
and level before setting
anchor into concrete. Use a measuring tape
to ensure all corners are the same. Use level
on all four sides.
**BASE MUST BE LEVEL & SQUARE, FOUNDATION MUST BE PROPERLY ANCHORED PRIOR TO GREENHOUSE ASSEMBLY
B
W06 must be cut for patio or deck installation
Drill holes in bottom of base to allow for proper fastener to pass
through prior to moving forward with assembly. You determine
and aquire proper fastener prior to installation.
OR
6
STEP ONE
Use: Quikrete fast setting
concrete to anchor base.
Pour in Quikrete and water
no mixing required.
(Not Included).
Base
S03/M01
W06
Base
S03/M01
W06 Must Be Modified
Use a Hacksaw or Tinsnip to
cut down the length of W06,
then install cut side down to
level surface.
W06
* Must be inserted
into the ground, and secured
with concrete.
Base
S03/M01
W06
Base
S03/M01
CUT
