Page 2
Fig.1
Fig.2
A1
D
A2
C1
C2
E
B
E
D
K
J
Q
Q
P
S
Q
L
L
Q
R
Fig.3
GLIDER BRACKET
Step 1:
IMPORTANT NOTE: WE RECOMMEND TWO PEOPLE WORK TOGETHER TO ASSEMBLE THE GLIDER
Remove all protective materials and set parts on a flat, non-abrasive surface. Identify parts packed in carton against the parts list. If you are missing
any parts or are unsure how to proceed with assembly,
.
Assembly references to "left" and "right" are designated by facing the glider and NOT by sitting in it.
please call our Product Specialists immediately at
.
Do not attempt to assemble
the chair if any parts are damaged or missing
.
1-800-491-4958
Attach glider base left leg (A1) to one of the glider base leg support bars (B) using 5/16"x35 mm bolts (I), Ø8.5x1.5 mm washers (L) and 5/16" nuts (P)
as shown in
.
Repeat on glider base right leg (A2). Repeat entire procedure for remaining glider base leg support bar (B).
Attach glider back frame (D) to glider left arm (C1) using 5/16"x60 mm bolts (G), Ø8.5x1.5 mm washers (L) and 5/16" nuts (P) as shown in
.
Attach seat frame to left arm using 5/16"x60 mm bolts (G), Ø8.5x1.5 mm washers (L) and 5/16" nuts (P) as shown in
.
Repeat to attach glider seat back (D) and glider seat frame (E) to glider right arm (C2). Attach glider back frame and glider seat frame using a
1/4"x25 mm bolt (J) and a Ø6.5x1.0 mm washer (K) as shown in
. Guide bolt and washer through pre-drilled hole in glider seat frame and into
pre-drilled hole on glider back frame.
Step 2:
Do not over tighten.
Step 3:
Do not over tighten.
Do not over tighten.
Fig.1
Fig.2
Fig.2
Fig.3
S
L
P
Q
R
I
L
G
Q
L
G
L
G
Q
Q
G
L
L
P
S
P
L
L
P
