grandimpianti GWH Series Скачать руководство пользователя страница 26 | Manualshive

Страница: 26 / 82

grandimpianti GWH Series Скачать руководство пользователя страница 26

26

WASHING MACHINE Series GWH / GWM / GWN

GENERAL DESCRIPTION

INTENDED USE

The appliance concerned is intended for industrial use:

Operation

Allowed

Forbidden

Processing environment

WASHING of:

Fabrics

(with limited weight

and volume)

• Fabrics soaked with

flammable substances,
solvents, acids, grease.

• Any material other than

fabric.

Industrial laundries,

self-service laundries, condo

laundries

laundries for hotels, nursing

homes, communities,

hospitals, and the like.

It has been designed to:

• Meet the specific requirements mentioned in the contract of sale;
• Be used in accordance with the use instructions and limitations specified in this manual.

The appliance has been designed and manufactured to operate in safe conditions if:

•  it is used within the limits described in this manual;
•  procedures described in this manual are adhered to;
•  routine maintenance is carried out at intervals and with the methods indicated in this manual;
•  extraordinary maintenance is carried out promptly in case of necessity;
•  safety devices are not removed and/or bypassed.

WARNING!
It is strictly forbidden to wash items of clothing soaked with flammable substances, solvents, acids
and/or grease.

WARNING!
Any other use that is not explicitly indicated must be considered dangerous.

WARNING!
Remove all traces of stony and/or sandy material from fabrics before placing them into the washing
machine.

WARNING!
The Manufacturer cannot be held liable for damage deriving from any improper, incorrect use, or in
any case not taken into account in this manual.

Should it be necessary to wash special fabrics, please contact the after-sales assistance of the
Manufacturer in advance.

Please follow the washing instructions on the fabric labels. The manufacturer is not liable for damage
to fabrics caused by washing procedures other than those described in this manual.

IMPROPER, REASONABLY PREDICTABLE USE

The following are reasonably improper uses:

•  Washing and/or spinning animals.
•  Washing and/or spinning materials other than those specified in the contract of sale.
•  Using fabrics containing traces of stony and/or sandy materials.

GENERAL DESCRIPTION

«
...
24
25
26
27
28
...
»

Содержание GWH Series



















































































Отзывы:

Нет отзывов