grandimpianti GWH Series страница 16 Скачать руководство пользователя | Manualshive

Страница: 16 / 82

background image

16

WASHING MACHINE Series GWH / GWM / GWN

GENERAL INFORMA

TION

WARNING!
The appliance can be used by children and people with reduced physical, sensory or mental
capabilities, or lack of experience or necessary knowledge, provided they are supervised or have
received instructions for the safe use of the appliance and understand the dangers associated with
it. Children must not play with the appliance. Cleaning and maintenance meant to be performed by
the user must not be performed by unsupervised children.

WARNING!
The safety standards for operating personnel, contained in the instructions, must be printed and
made available in a visible place near the appliance.

WARNING!
The appliance has been designed for washing fabrics. Other objects can damage the appliance and
cause damage or injury.

WARNING!
The manufacturer is not responsible for damage to fabrics that are cleaned with an inadequate
washing method.

WARNING!
If the appliance is used for special applications, follow the instructions and warnings to avoid
personal injury.

WARNING!
The appliance must be installed according to instructions. Unloading, loading, and connections must
be performed by the manufacturer's qualified employees and/or authorised personnel, following the
instructions given in this instruction manual in accordance with local regulations.

WARNING!
The existing rules for connection to the local electricity network (TT, TN, IT, ...) must be complied with.
It may not always be possible to connect systems in the standard version to the IT electricity networks
Contact the Manufacturer.

WARNING!
All types of appliances are manufactured according to the Directive on Electromagnetic Compatibility
(EMC). They can be used only in the spaces corresponding to the appliance class of electromagnetic
compatibility (conform at least to Class A - industrial environment). For safety reasons, please comply
with the minimum safe distance from electrical or sensitive electronic systems.

WARNING!
Do not change the setting of the frequency inverter parameters. This can cause serious injury, fire,
damage, etc.

WARNING!
During transport and storage operations do not exert excessive pressure on the packaging as the
machine components located along the packaging edges may be damaged.

WARNING!
Do not start the appliance if the transport brackets applied to the drum have not been removed (only
for "High Spin" washing machines).

WARNING!
Use only copper conductors. The appliance must be connected to a power supply circuit to which no
lighting units or general use equipment are not connected.

«
...
14
15
16
17
18
...
»

Содержание GWH Series



















































































Отзывы:

Нет отзывов

Похожие инструкции для GWH Series

Бренд: Labconco Страницы: 72

Бренд: U-Line Страницы: 2

Бренд: Dacor Страницы: 16

Бренд: Metos Страницы: 52

Бренд: Rac Страницы: 12

Бренд: Kärcher Страницы: 366

Бренд: Kärcher Страницы: 112

Бренд: Kärcher Страницы: 172

Бренд: Daewoo Страницы: 27

Бренд: Daewoo Страницы: 17

Бренд: Blanco Страницы: 16

Бренд: Ryobi Страницы: 68

Бренд: Technika Страницы: 13

Бренд: OZTI Страницы: 24

Бренд: Gorenje Страницы: 45

Бренд: NEFF Страницы: 52

Бренд: Indesit Страницы: 16

Бренд: elvita Страницы: 38

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды