USE AND CARE INSTRUCTIONS - LCD
1
LCD Functions:
1. Cooking Timer (shows cooking time remaining)
2. Grill Temperature Display (indicates temperature of grill)
3. Flame Level Detector (indicates flame level)
4. Battery Power Display (indicates how much battery power is remaining)
5. Rotisserie Motor Controls
3
Key Functions
This key turns the LCD Panel on/off.
This key allows you to navigate the LCD Panel's display settings. For example, you can use this key
to display the temperature in Fahrenheit or Celsius, or set the display so that no temperature settings
are shown.
This key is a directional key. It can be used to navigate the LCD display functions. (Ex: raising the
temperature setting).
This key is a directional key. It can be used to navigate the LCD display functions. (Ex: lowering the
temperature setting).
This key is for controlling the Rotisserie Motor. You can turn the motor on/off, and turn off the LCD display
for the Rotisserie Motor.
LCD Symbols:
2
°C
°F
Celsius or Fahrenheit
Reading
Timer
Alarm Sign
Temperature Probe
Setting
Battery Power
Display
17
4
How to Operate LCD Modes
Setting the Timer: Press to reach the Timer mode. When appears, press or to set the
desired cooking time. (Note: The timer can only measure in minute units ranging from 0-200 minutes.)
When you have selected your desired time, wait 3 seconds and your time will be saved. will disappear
from the LCD Panel, and the alarm will sound once. When the timer reaches the pre-set time, the alarm
will sound for 10 seconds. If you press any key the alarm will stop. If you fail to press a key the alarm
will continue to sound every minute for four minutes.
Setting Cooking Temperature for the Temperature Probe: Your temperature probe is used to measure the
internal temperature of any meat that you are cooking. Your meat must reach a certain internal temperature
before it can be considered fully cooked. Your temperature probe system allows you to preset and measure
a cooking temperature. (Note: Do not leave the Temperature Probe inside a lit grill for an extended period
of time-this can melt the wire. Check meat by placing the Probe in periodically, and taking it out after getting
a reading. Do not leave the Probe inside the meat for the entire cooking duration. Do not use the Probe
to measure the internal temperature of the grill.)
Press to reach the mode. When °C or °F appears, press or to set your desired cooking
temperature. (This temperature can be set from 0 to 250°F/120°C.) When you have selected your cooking
temperature, wait 3 seconds and your cooking temperature will be saved. The will disappear from
the LCD Panel. When the set temperature is reached, the alarm will beep every 8 seconds until the meat's
temperature is lower than the set temperature. At this point, you should remove your meat from the grill
and check to see if it is fully cooked.
