11
Note: If the Battery Pack is worn out, you can install AA batteries
in the Battery Box as a back-up. (Refer to Step 6-2).
6-1
Install Battery Pack and Connect Electric Wires
Put the Battery Pack into Battery Bracket as shown.
Thread the two Electric Wires through the Cord Holder as shown, then push Electric Wire Plug of the
Battery Pack into the Electric Wire Socket for the LCD Display. Push Electric Wire Plug of the LCD Display
into the Electric Wire Socket for the DC Motor.
(Please refer to the Use and Care Instructions-LCD on pages 17-18 for more information).
6-2
Install Back Up Batteries in the Battery Box. Connect Electric Wires.
Unplug the Battery Box wire from the Electric Wire Socket for the LCD display. Next, take out the Battery
Pack from the Battery Bracket.
Open the cap for the Battery Box and put 8 AA batteries (sold separately) inside.
Close the cap and then put the Battery Box into the Battery Bracket as shown in the diagram.
Push Electric Wire Plug of the Battery Pack into the Electric Wire Socket for the LCD Display.
7
Install Partition Panel (For XI08ALP Model)
Line up the fittings in the Partition Panel with the slots in the Partition Panel Brackets. From the underside
of the Partition Panel, insert 4 Hex Head Screws 3/16"x3/8" and tighten securely (see diagram).
For illustration purposes, the
Grill Head is not shown.
Hex Head Screws
1/4"x3/8"
Qty. 4 (LPG Model)
Part # S162G04062
Socket of LCD
Plug of Battery
LCD
DC Motor
DC Battery
