Grandbeing MX1616-310, Руководство по эксплуатации

Страница: 10 / 27

Page 6
"
NOTE: RS232 port, RS485 port and LAN port are for matrix control. The LAN port is
connected to the computer via direct UTP and connected to the router via cross
UTP. ISP port is only for upgrading.
■
Connections
①
Connect the HDMI input sources ( such as HD-DVD, PS3, STB etc)
into MX1616-310.
②
Connect the HDMI outputs ( such as HD-LCD, HD-DLP) into
MX1616-310.
③
Connect two CAT-5E cables to both the STP/UTP outputs of MX0808-310
and inputs of STP/UTP receiver (such as EX0101-U31/33/51/53 etc).
Please pay attention to the sequence of the two cables, CAT5e-1->
CAT5e1, CAT5e-2->CAT5e2. ( The cable termination must follow the
standard of EIA/TIA 568B, if Single UTP mode, just connect CAT5E-2).
④
Connect the HDMI output( such as: HD-LCD
、
HD-DLP
）
into the
STP/UTP receiver.
⑤
Connect the IR RX receiving cable into STP/UTP receiver IR RX and
connect, the IR TX cable into MX1616-310 IR emitter.
⑥
Power on the input source you want to show.
⑦
Connect the power supply into MX1616-310 and turn on the display you
want to watch.
⑧
Use the remote supplied or pushes the button on the front panel to choose
input source, or using touch panel, infrared extension receiver, RS232,
RS485 or LAN port to do the control.
"
NOTE: IR emitter (IR TX) should be sticked as near as to the DVD IR receive window.