Fire Bowls and Inserts Premium Line
Automated Operation
Page 13
MOUNTING BRACKET
ANCHOR BOLTS (3)
AND HARDWARE
(NOT INCLUDED)
CLAMP RING AND
MOUNTING BRACKET
HARDWARE
BOWL
SUPPORT
PLATE
GRAND EFFECTS
BURNER ASSEMBLY
WALL OR
PILASTER
12 VAC ELECTRICAL
(UNDERGROUND)
3/4” GAS PIPING (UNDERGROUND)
BRACKETS
(FOLD OUT)
Figure 8. Bowl Components
IMPORTANT:
When customers supply their own bowl, the burner
assembly must be installed as shown in the following
figure. The support plate includes four (4) all-threaded
rods and nuts. The nuts must be set to accomodate the 2”
media depth. The customer- supplied bowl must have a 4”
diameter hole located in the bottom. The mounting bracket
must be installed for proper cooling and drainage. The
burner assembly must be installed flush with the top of the
bowl. The mounting bracket must be installed for proper
cooling of the burner assembly. The warranty may be
voided if the mounting bracket is not installed. Customer-
supplied bowls must not be smaller than 26” inner diameter
and 9” inner height.
