Grand Design Momentum, Руководство пользователя

Страница: 48 / 220

46
Occupant Safety
Combination Carbon Monoxide /
Propane Alarm, Continued
Procedures to take during a CO alarm (USA)
If signal sounds (4 beeps and flashing or solid red light):
1. Press the Test/Mute button.
2. Immediately move to fresh air either outdoors or by an
open door or window.
◦
Check that all persons are accounted for.
◦
Call 911, your local emergency service,
or fire department.
◦
Do not re-enter the premises or move away from the
open door/window until the emergency responders ar-
rive, the premises have been aired out and your alarm
remains in its normal operation.
3. If your CO alarm reactivates within a 24-hour period:
◦
Repeat steps 1-2.
◦
Call a qualified appliance technician to inspect that all
fuel burning appliances are operating properly, and to
investigate for sources of carbon monoxide.
◦
If problems are identified during this inspection have
the equipment serviced immediately.
4. Note any combustion equipment not inspected by the
technician. For more information about CO safety and this
equipment, consult the manufacturers’ instructions, or
contact the manufacturer directly.
5. Confirm that a motor vehicle or generator engine operating
nearby is not the source of CO inside your RV.
Procedures to take during a CO alarm (Canada)
If signal sounds (4 beeps and flashing or solid red light):
1. Operate the Test/Mute.
◦
Immediately move to fresh air (outdoors
or by an open door/window).
◦
Check that all persons are accounted for.
◦
Do not reenter the premises or move away from the
open door/window until the emergency responders
have arrived, the premises has been aired out, and your
alarm remains in its normal condition
2. Call your emergency local service, fire department or 911.