INSTRUCTION
MANUAL
6
ACCESSORY
INSTALLATION
BEFORE
OPERATING
UNPACKING
AND
CLEANING
THE
WINE
COOLER
•
Remove the exterior and interior packing materials.
•
Let the appliance stand upright for approximately
24
hours
before connecting
it to the power source, which helps to reduce the possibility of a cooling-system
malfunction from handling during transportation.
•
Use a soft cloth to clean the interior surface with lukewarm water.
•
Install the door handle provided with the appliance by following these steps:
1st
Step
2nd
Step
3rd
Step
-Gently pull the door Gasket to one
side to reveal the two Handle
Screws and Washers pre-placed .
-Fix Handle by screwing the
two Handle Screws tightly.
-Restore the Gasket.
Gasket
Handle
Washer
Handle Screws
LOCK
&
UNLOCK
THE
DOOR
(FOR
OPTION)
●
Lock is an optional function. If your Wine Cooler has such function, a key should be
attached inside the packing of this Manual.
●
Insert the key into the lock and turn it counter-clockwise to unlock the door. To lock
it, please turn clockwise. Please save the key well.
OPERATING
THE
WINE
COOLER
WORKING
CLIMATE
•
The appliance is designed for operating from SN to T climate (see below climate class
chart). It is recommended to maintain the ambient around 22-25°C which helps the
appliance working with low power consumption.
Climate
Class
Ambient
Temperature
SN
10 - 32 °C (50
ºF-90ºF)
N
16 - 32 °C (61
ºF-90ºF)
ST
18 - 38 °C (64
ºF-100ºF)
T
18 - 43 °C (64
ºF-109ºF)
