11
INSTRUCTION
MANUAL
CARE
AND
MAINTENANCE
CLEANING
THE
WINE
COOLER
•
Turn off the power, unplug the appliance, and remove all items including shelves.
•
Wipe the inside surfaces with a sponge and baking soda solution. The solution should
be about 2 tablespoons of baking soda to 1 quart (approx. 1 litre) of warm water.
•
Wash the shelves with a mild detergent solution. Allow wooden shelves to dry before
placing back into the wine cooler.
•
Wring excess water out of the sponge or cloth when cleaning area of the controls, or
any electrical parts.
•
Wipe the outside cabinet with warm water and mild liquid detergent. Wipe dry with
a clean soft cloth.
•
Do not use steel wool or steel brush on the stainless steel. These will scratch the
stainless steel with steel particles and rusting may occur.
POWER
FAILURE
Most power failures are corrected within a few hours and should not affect the
temperature of your appliance if you minimize the number of door openings. If the
power is going to be off for a longer period of time, you need to take the proper steps
to protect your wines.
MOVING
THE
WINE
COOLER
•
Remove all items.
•
Securely tape down all loose items (shelves) inside your appliance.
•
Turn the adjustable leg up to the base to avoid damage.
•
Tape the door shut.
•
Be sure the appliance stays secure in the upright position during transportation. Also
protect outside of appliance with a blanket, or similar item.
ENERGY
SAVING
TIPS
•
The appliance should be located away from heat producing appliances, and away
from direct sunlight.
•
Ensure that the unit is adequately ventilated. Never cover air vents.
•
Only open the door when necessary. Avoid leaving the door open for long periods or
opening/closing the door frequently.
