background image

Never

  light  your  gas  smoker  with  the  door

s

  closed

or  before  checking  to  ensure  the  burner  tube  is
fully  seated  over  the  gas  valve  orifice.

Never

  allow  children  to  operate  your  smoker.  Do

not  allow  children  or  pets  to  play  near  your  smoker.

Use  of  alcohol  or  drugs  may  impair  the  ability  to
assemble  and  operate  the  appliance.

Keep  fire  extinguisher  readily  accessible.  In  the
event  of  a  oil/grease  fire,  do  not  attempt  to  extin-
guish  with  water.  Use  type  B  extinguisher  or
smother  with  dirt,  sand  or  baking  soda.

In  the  event  of  rain,  cover  the  smoker  and  turn  off
the  burner  and  gas  supply.

Use  your  smoker  on  a  level,  stable  surface  in  an
area  clear  of  combustible  materials.

Do  not  leave  smoker  unattended  when  in  use.

Do  not  move  the  appliance  when  in  use.

Allow  the  smoker  to  cool  before  moving  or  storing.

Do  not  use  your  smoker  as  a  heater.

This  smoker  is  not  intended  to  be  installed  in  or
on  recreational  vehicles  and/or  boats.

The  smoker  is  not  intended  for  commercial  use.

USE  AND  CARE  INSTRUCTIONS

    WARNING

!

!

Use  your  smoker  outdoors,  at  least  3  feet
away  from  any  wall  or  surface. 

Use  your

smoker  at  least 

3  feet  away

  from  combustible

objects  that  can  melt  or  catch  fire  (such  as
vinyl  or  wood  siding,  fences  and  overhangs)  or
sources  of  ignition  including  pilot  lights  on
water  heaters  and  live  electrical  appliances.

Never

  use  your  gas  smoker  in  a  garage,  porch,

shed,  breezeway  or  any  other  enclosed  area.

Never 

obstruct  the  flow  of  ventilation  air  around

your  gas  smoker  housing.

LP  Gas  smoker  models  are  designed  for  use  with
a  standard  20  lb.  Liquid  Propane  Gas  (LP  Gas)
tank,  not  included  with  smoker. 

Never 

connect  your

gas  smoker  to  an  LP  Gas  tank  that  exceeds  this
capacity.  A  tank  of  approximately  12  inches  in
diameter  by  18-1/2  inches  high  is  the  maximum  size
LP  Gas  tank  to  use. 

You  must  use  an 

"

OPD"  gas

tank  which  offers  a  listed  Overfill

 

Prevention

Device.

  This  safety  feature  prevents  tank  from  being

overfilled  which  can  cause  malfunction  of  LP  Gas
tank,  regulator  and/or  smoker.

The  LP  Gas  tank  must  be  constructed  and  marked
in  accordance  with  the  Specifications  for  LP-Gas
Cylinders  of  the  U.S.  Department  of  Transportation
(D.O.T.)  or  the  National  Standard  of  Canada,  CAN/
CSA-B339,  Cylinders,  Spheres  and  Tubes  for
Transportation  of  Dangerous  Goods;  and  Commis-
sion,  as  applicable.

The  LP  Gas  tank  must  have  a  shutoff  valve,
terminating  in  an  LP  Gas  supply  tank  valve  outlet,
that  is  compatible  with  a  Type  1  tank  connection
device.  The  LP  Gas  tank  must  also  have  a  safety
relief  device  that  has  a  direct  connection  with  the
vapor  space  of  the  tank.

The  tank  supply  system  must  be  arranged  for
vapor  withdrawal.

The  LP  Gas  tank  used  must  have  a  collar
to  protect  the  tank  valve.

Never 

connect  an  unregulated  LP  gas  tank  to  your

gas  smoker.  The  gas  regulator  assembly  supplied
with  your  gas  smoker  is  adjusted  to  have  an  outlet
pressure  of  11"  water  column  (W.C.)  for  connection
to  an  LP  gas  tank.  Only  use  the  regulator  and
hose  assembly  supplied  with  your  gas  smoker.
Replacement  regulators  and  hose  assemblies
must  be  those  specified  by  Grand  Hall.

Have  your  LP  Gas  dealer  check  the  release  valve
after  every  filling  to  ensure  it  remains  free  of  defects.

Always  keep  LP  Gas  tank  in  upright  position.

Do  not subject  the LP Gas tank to excessive  heat.

Never  store  an  LP  Gas  tank  indoors.  If  you  store
your  gas  smoker  in  the  garage 

always

  disconnect

the  LP  Gas  tank  first  and  store  it  safely  outside.

LP  Gas  tanks  must  be  stored  outdoors  in  a  well-
ventilated  area  and  out  of  the  reach  of  children.

Disconnected  LP  Gas  tanks  must  not  be  stored  in
a  building,  garage  or  any  other  enclosed  area.

Keep  gas  regulator  hose  away  from  hot  smoker
surfaces  and  dripping  grease.  Avoid  unnecessary
twisting  of  hose.  The  regulator  and  hose  assembly
can  be  seen  after  opening  the  doors  (if  applicable)
and  must  be  inspected  before  each  use  of  the
smoker.  If  there  is  excessive  abrasion  or  wear  or  if
the  hose  is  cut,  it  must  be  replaced  prior  to  using
the  smoker  again.

Any  attempt  to  convert  the  smoker  from  one  fuel
type  to  another  is  extremely  hazardous  and  must
be  performed  by  a  qualified  gas  technician  only,
using  a  NG  Conversion  Kit  purchased  from  Grand
Hall.

CORRECT  LP  GAS  TANK  USE

    WARNING

!

!

Do  not  store  a  spare  LP-Gas  tank  under  or  near
this  appliance.
Never  fill  the  tank  beyond  80  percent  full;  and
If  the  information  in  "(a)"  and  "(b)"  is  not  followed
exactly,  a  fire  causing  death  or  serious  injury  may
occur.

A.

B.
C.

10

Содержание CSM07ALP
























Отзывы: