23
USE AND CARE INSTRUCTIONS
Disconnecting A Liquid Propane Gas (LPG)
Tank From Your Grill
Make sure the Burner Valves and LP Gas
tank valve are off. (Turn clockwise to
close.)
Detach the hose and regulator assembly
from the LP Gas tank valve by turning the
Quick Coupling Nut counterclockwise.
WARNING
!
!
If you have a gas leak that cannot be repaired
by tightening, turn off the gas at the source,
disconnect fuel line from your grill and call
1-800-761-5456 or your gas supplier for assistance.
Check all connections for LP Gas Leaks
Never
test for leaks with a flame. Prior to first use,
at the beginning of each season, or every time
your LP Gas tank is changed, you must check for
gas leaks. Follow these three steps:
Grill
Check that the end of each Burner Tube is
properly located over each Valve Orifice
Grill Model
Angle to view
orifice and
adjust air shutter
Regulator
Gas Valve/Manifold
Assembly
View from under
the range head
Gas Valve/Manifold
Assembly
Range
Regulator
R
Push tenon down
on one side and up
on the other side to
unlock
L
Air shutter
View from under the
grill head
Air shutter
1.
Open lid
2. Remove Grease Tray and Drawer. (Note: Be sure
to push the tenon (release) down on one side
and up on the other (either side) of the drawer
to unlock to remove the Drawer.)
Make a soap solution by mixing one part liquid
detergent and one part water.
Turn the grill Control Knobs to the full OFF
position, then turn the gas ON at source.
Apply the soap solution to all gas connections
indicated by the arrows. See diagram. If
bubbles appear in the soap solution the
connections are not properly sealed. Check
each fitting and tighten or repair as necessary.
